How to Reset Netgear Extender

This guide gives users, two simple steps through which users can reset their Netgear wifi extender:-

• Through Web
• Manual Reset Button

We hope that this guide will help our users to solve/fix the problems related to the Netgear wifi extender.

Some Precautions That One Must Follow Before Resetting Your Netgear Extender:-

Many users trying to reset their Netgear Extender smoothly, but not all are successful. Don't worry, here are some precautions that must be taken in order to successfully reset netgear extender.

• Verify that the extender is connected to a dependable power source.
• To connect your extender, avoid using the Extension cable.
• Connecting your extender should not be done with worn cables.

Why is it important to take these precautions?

It is important because any damaged or weak point can interrupt the connection, and if the connection is interrupted during the reset process, it may not be suitable for many users as it may damage the firmware or memory of your device.

There are two ways through which  you can rest your Netgear range extender

• Manually through the Factory reset button.
• Through Web

Manually Through Factory Reset Button 

Many users make the mistake of resetting their extender while it is turned off, and we hope that you will not make the same mistake.

Check that the extender you intend to reset is turned on.

• Netgear factory reset key
• It is designed in such a way that you never accidentally click the Factory reset button so that you do not accidentally click it.
• If you are in dark support or space, consider using a flashlight and looking for the button on the backside of the router.
• On your Extender, press the Factory Reset Button.
• Insert a paper clip or a pointed object, such as a pen, into the hole.
• Do not apply too much pressure; the button is soft, and applying too much pressure may cause it to break.
• For about 10-15 seconds, press the reset button.
• Remove Your Finger From The Reset Button
• When you see the extender light turn on, release the reset button.

 

Note:- Do not press the reset button for too long as this may damage your extender and possibly freeze the entire process.
 

• Allow the Extender Reset Process to Finish
• The extender will restart after the factory reset process is completed successfully.
• Throughout the process, ensure that the extender is connected to a reliable power source and turned on.
• Wait until all of the lights on the extender are solid green and not flickering.
• Please keep in mind that the process can take up to 5-10 minutes to complete.

 

Reset  Netgear Extender Using Mywifiext Net

In order to reset your Netgear extender, you will need the following things in hand  Laptop or a computer with a working internet connection

• When the extender is turned on,
• Enter the URL mywifiext.net or mywifiext.local into your web browser to access the official extender setup website.
• If none of the preceding IP addresses work, try 192.168.1.250.
• If you haven't changed your Netgear extender credentials, a Netgear smart wizard will appear and prompt you to do so.
• If you previously changed the default login credentials, enter the new credentials.

Note: If you forget your Netgear login credentials, try resetting them. To learn more about why changing your default credentials is important, read this guide.

• In the Netgear Genie Wizard, navigate to Settings.
• Once inside the Netgear genie wizard page, look for the reset option to reset the extender.
• In general, the reset button is found under the setting option, and then you click on another setting.
• Select the Reset option.
• You will see several options; select the reset option and confirm it by clicking the yes button.
• Wait for the process to finish before restoring the extender to its factory reset settings.
• Do not be alarmed; this will also end your session on the website and log you out.
• Reset the Extender to its factory settings.
• The extender will reboot once more during the reset process.
• Do not turn off the extender until all of the lights on the extender turn solid green.
• When the reset process is finished, you are ready to configure/set up your extender. This extender setup guide

Still facing an issue get your issue resolved by experts through the call and chat process. For more info, you can visit our website.