Methods for Netgear AC1900 WiFi Range Extender Setup

 Have you purchased a new Netgear AC1900 WiFi range extender? Don’t know how to perform Netgear AC1900 WiFi range extender setup? Looking for the ways for Netgear AC1900 Nighthawk WiFi Mesh Extender setup? Facing difficulty in extender setup? If so, don’t panic! You have reached the right spot. In this blog, you will get to know the simple guidelines for the Netgear ac1900 WiFi extender setup. Once you set up your extender, you can easily connect the WiFi booster to the home wireless router or modem and enjoy the high-speed internet connection on your device. Keep reading to know more. 

Instructions for the Netgear AC1900 WiFi Range Extender Setup 

Go through the below-mentioned instructions one by one for the Netgear AC1900 Nighthawk WiFi Mesh Extender setup using the Netgear Installation assistant:

Step 1: The first step is to turn on the Netgear AC1900 Nighthawk WiFi range extender.

Step 2: Make sure to place the extender nearer to the existing wireless router.

Step 3: After that, plug your Netgear AC1900 extender into the power socket.

Step 4: Now, you have to wait for some time until the power LED turns green. 

Step 5: Thereafter, connect your wireless router to the extender.

Step 6: Open an internet browser from your system. Go to the default web address to access the extender login web page. 

Step 7: The Netgear Installation assistant web page appears on the screen. 

Step 8: Follow on-screen instructions to connect the Netgear ac1900 extender to the existing WiFi network. 

Step 9: Move your extender to a new location, i.e., halfway between your wireless router and the area where you face poor WiFi signals. 

Step 10: If you get poor or no connection, go to the extender nearer your wireless router. Try to connect it again until the Link Status LED light turns white. 

Step 11: At last, find the best location to place the Netgear AC1900 extender. Thereafter, connect the client devices to the extended WiFi network. 

With the above steps, you can easily complete the Netgear AC1900 Nighthawk WiFi Mesh Extender setup.

Steps for Netgear AC1900 Nighthawk WiFi Mesh Extender Setup

Follow the below steps for the Netgear AC1900 Nighthawk WiFi Mesh Extender setup by using the WPS method:

Step 1: Firstly, switch on the Netgear ac1900 WiFi range extender.

Step 2: After that, place your extender nearer to the existing WiFi router.

Step 3: Next, plug your extender into the power socket.

Step 4: Now, wait for some time until the power LED light blinks on it.

Step 5: In the next step, press the WPS button on the Netgear ac1900 extender.

Step 6: If the Link status LED light turns white, the connection between your wireless router and extender is good. On the other hand, if the Link Status LED light is red or amber, move the extender nearer to the WiFi router and try to connect again. 

Step 7: Move your Netgear AC1900 Nighthawk WiFi Mesh Extender to the new location halfway between your router and the area where you face poor WiFi signals. 

Step 8: Take your WiFi-enabled computer or mobile device to the location where you face poor WiFi router coverage. 

Step 9: At last, connect the WiFi-enabled computer or mobile device to the extended network. 

That’s it! By following the above instructions, you can complete the Netgear AC1900 Nighthawk WiFi Mesh Extender setup on your device without any hassle.